People often forget the fact that buying a projector and bringing it home doesn’t end up the task of setting up a movie theater in the home. You have to set it up properly so that you can enjoy seamless movie session without worrying about anything. It is evident that when you install a home theater projector in your ceiling, it offers you the ideal movie theater-like experience which you won’t get in any other setup. Now it doesn’t change the fact that installing the projector to the ceiling is slightly a tricky chore, but with proper guidance, you can quickly achieve it.
Now, The question might be arising in your mind how to mount the projector to ceiling in your home?
Am I right?
However, installing a projector in the ceiling not only provides excellent viewing experience but also saves a lot of your space. You must have seen in churches that they mostly mount their projector in the ceiling because it not only keeps spaces but also saves you from a lot of ado. When you place a projector on a tablet, it creates a lot of hassle and blocks out almost the whole room. But with a ceiling mount, you won’t have to worry about anything because there won’t be any shake and won’t bother you with space.
Most importantly mounting a projector on the ceiling gives your whole setup a polished outlook. However, the installation process needs a lot of consideration and right tools which will assist you in perfect mounting process. Basically, the whole mounting process depends upon measurement, and if you fail in any area, then it will jeopardize the entire arrangement. To ease all your headache, we have mentioned all the steps that you need to follow to mount the projector in the ceiling properly. After hours of proper research, we have formulated the guidance which will lead to appropriate installation.
You might be wondering:
What types of tools you will need during the installation process.
For the installation process, you will require some crucial tools along with some materials which assist you in hassle-free mounting process. In general, you will need a sturdy electric drill, proper measuring tape, step ladder, a lot of screws, pencil ( for marking ), decorative covers ( optional ) and screwdriver. Along with this, you might also require some 2×4 boards and anchor bolts, but they entirely depend upon your requirement. You should also arrange some wire hanger to give a clean look.
Most of the projectors nowadays come with mounting bracket whether they are under $100 or more than thousand. So you won’t worry about spending extra money on buying the mounting bracket from Amazon.com.
Now, without further discussion let’s get down to business:
Steps For Mounting A Projector To The Ceiling
Let’s start discussing the steps which will help you to mount the projector to ceiling:
Step 2: Now you have to find the appropriate screen height which will be required for placement of the projector in the center location. It is crucial that you should use the dimension of your screen size you will need while watching movie or TV series. It is advisable to keep the lower section of screen minimum 24 inches off the ground. Opt for the optimum screen size which is often around 100 inches as it will provide you the best visual quality. Mark the ideal screen placement with pencil or tape and point out the viewing section of the screen but avoid the edges.
Now, here’s the tricky part:
Step 3: Now you have to find out the ideal position for your projector, and for that, you have first to calculate the throw distance. It can be estimated using the throw ratio mentioned in the manual of the projector. You have to utilize the screen width X throw ratio = throw distance formula which will provide your ideal distance between screen and projector. However, some projector comes with throw ratio range, and for that, you have to utilize trial and error method to find the distance which would suit you.
It gets better here:
Step 4: This stage is basically a continuation of the previous step, and here you will have to calibrate a lot of factors just to find the best throw distance. After knowing the throw distance, you have to inspect every section of the room and find out which position will be suitable. First, you have considered the seating position, and it is ideal to keep a safe distance from the hanging projector. Then you should consider power outlet position because the length of the power cable isn’t very long and you might have to use an extension for connection. You will also have to think about the cable length of HDMI.
Step 5: In this level, you will have to churn out the ideal vertical offset which will determine what vertical length you have to place the projector. Generally, vertical offset is mentioned as a percentage of the positive and negative mark. So by utilizing the offset, you have to set the projector at various height while curating the lens shift and check the best viewing length. However, if you don’t find any vertical lens shift then you just hang the projector at the recommended height given in the manual. You can also use extra clamps to place the projector at the right height.
Step 6: Like step 4, it is also a continuation of the previous level, and you need utilize one formula to find the ideal vertical placement which will provide best viewing angle. The recipe is offset from your projector X screen height = Distance above the center of the screen. Now suppose you have a projector with widescreen aspect ratio, so it means the overall image size will be more extensive than usual. Then you have to place the projector almost parallel the midsection of your screen.
Step 7: This step is entirely an optional step, and you will require it only when you have to utilize the horizontal lens shift your projector. It is not mandatory to use the horizontal lens shift, but you might need to place your projector correctly. To find the horizontal lens shift, you have to use offset percentage X screen width = distance of the lens from the center of the screen in left or right manner.
Now, the final part:
Step 8: Now after finding out the position and you should use a power drill to make a hole in the ceiling. However, it is recommended that the place in the roof should have proper concrete otherwise there will be chances of an accident. You can even use the extended wood panel to connect two joists in the ceiling and then install the bracket in the required area.
Step 9: In this step, you have to attach the mounting bracket to the projector, and nowadays most of the projector comes with a bracket. But if your projector doesn’t have any bracket, then it is advisable you should go for high quality and sturdy mount. A proper variety will ensure that the projector won’t get deflected from its position even after months of usage. Moreover, it will make sure that the projector won’t fall down. However, you might also need to buy an extra suspended ceiling kit so that the mount can take care of the heavy load.
Now you have to attach the bracket to your projector, and it would be best if you can follow the instruction manual properly. While attaching the bracket, you should make sure the bracket is in-line with the lens. You should adequately screw the mount so that the entire bracket is ideally connected to the projector.
Step 10: Now it is time for you to mount the other bracket in the ceiling which will get padded with the bracket in the projector. Then put screws in the holes you made earlier and tighten the bolts so that bracket won’t fall down quickly. After that attach the two bracket properly and check whether the projector is drifting or not.
Now, the ending part:
Step 11: Lastly you have to hook the cables to the projector and use power extension if the main power plug is far from the projector. It is advisable to use long HDMI cable otherwise, you can’t bring neatness to the whole setup. You might also consider using decorative trunking which will assist you in hiding the wires and provide a clean look. Moreover, it saves the cables from any kind of wire and tear, and there will be hardly any chance of electrical mishap. Apart from covers, you can also use fastener and cord supports which are readily available in local stores.
It doesn’t end here:
So all these steps will guide you to properly mount your projector to the ceiling without facing any hassle. However, the whole setup process doesn’t end here, and you have to install the screen on the wall. Previously you must have used provisionally mount to check the positioning of the screen, and now it is time put the final nail to the frame.
Now, you might be wondering:
How will you tune the projector orientation after mounting?
Don’t worry! We have briefly described the necessary features you need to tune to get the perfect orientation.
It is always recommended to avoid using keystone correction because it reduces the quality of the visuals. People often tilt their projector up or down to get a good view, and they utilize the keystone correction to remove the blurry sides of the image on the screen digitally. But it is advisable to mount the projector correctly so that you can avoid keystone correction.
Zoom and Focus
While setting up the projector, you need tune the zoom and focus by using the radial on the lens. Adjusting the radial ring allows you zoom the image correctly on the screen while the other ring will enable you to focus the frames properly. It is essential that you should zoom up to an optimum level where the image entirely covers the screen, and there is zero image spill.
The picture adjustment requires you tune a lot of features which include aspect ratio, brightness, contrast, color saturation, sharpness, tint, etc. For aspect ratio, it is best to keep them in a widescreen mode which is 16:9. Now, most of the projectors come with various preset settings to tune picture settings, and these presets include Vivid, Normal, Cinema, Game, Sports mode, etc. These adjustments totally depend upon your eye, and you can even manually adjust the setting if you don’t like any of them.
Now if your projector supports 3D content, then you can customize the 3D settings manually so that you can get the best out of the projector. But most of the time, projectors come with preloaded settings so you won’t have to change the setting every time you start any 3D content. But if you are not satisfied with the brightness and color output then you can tune them by moving to the setting option.
Not every projector comes loaded with built-in speaker system, and moreover, most of the built-in speaker won’t provide you loud sound. So it is always recommended to add an external sound system which will mesmerize you with soothing sound quality. Moreover, the large sound system will assist you to bring the movie like experience in your home which you won’t get with built-in speakers.
Raymond is a Product Support Specialist at Canon USA. He mainly deals with the projectors. He completed graduation in Computer Science from Broome Community College. He is a former Performance Improvement Specialist of Jewish Home Lifecare. He conducted a lot of webinar as a guest speaker.